Kopis CineWhoop 3″

FC: Kakute H7 BT

• MCU – STM32H743 32-bit processor running at 480 MHz
• IMU – MPU6000
• Barometer – BMP280
• OSD – AT7456E
• Onboard Bluetooth chip – ESP32-C3
  • SpeedyBee IOS & Android App Compatible
  • Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm).
• 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
• 9x PWM Outputs (8 Motor Output, 1 LED)
• 2x JST-SH1.0_8pin port (4in1 ESCs, x8/Octocopter compatible)
• 1x JST-GH1.5_6pin port (For HD System like Caddx Vista & Air Unit)
• Battery input voltage: 7V to 42V
• BEC 5V 2A Cont.
• BEC 9V 1.5A Cont.
• Mounting – 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
• Dimension – 35x35mm
• Weight – 8g

• F4 MCU with BLHELI32 firmware
• Maximum PWM output upto 96K (default 48K)
• Amperage meter scale ratio has been adjusted to 168.
• PWM input, TLM supported
• Voltage output (VBAT)
• NO output BEC
• Supports oneshot / Multishot / Dshot PWM
• Supports damped light
• Supports 3-6S lipo input
• Ext. cap needed for 6s (1000uf 35v for 6s usage.)
• Mounting holes: 20x20mm(M3)
• Size:30 x 39 mm
• Weight: 7.2g

VTx:Caddx Polar Vista Kit starlight Digital HD FPV system(Optional)

• Weight:254g（included Caddx Polar Vista Kit）
• Recommend battery: 650mah~1300mah 4s

Includes:

• 1x Kopis CineWhoop FPV racing drone
• CaddxFPV Digital HD Camera Polar Kit(Optional)
• 4x T3140 Propeller
• 1x Battery strap(installed)

Analog version #30065,30066
VTx:Atlatl HV V2
FPV camera:1200TVL Foxeer Micro Razer FPV Camera

• Weight:237g
• Recommend battery: 650mah~1300mah 4s

Includes:

• 1x Kopis CineWhoop FPV racing drone
• 4x T3140 Propeller
• 1x Protective Case Mount for GoPro Hero5
• 1x Battery strap(installed)